Silicone Thermal pads
Depending on the application, thickness, supply format and other technical-commercial parameters, we have 3 different ranges of silicone thermal pads:
SKZ series
From 1’5W/mk to 6’2W/mk
Thickness from 0’25mm to 8mm.
With or without internal glass cloth reinforcement.
Available in sheets or die-cut pieces
SKBT series
From 1W/mk to 7W/mk
Thickness from 0’200mm to 9mm.
With or without internal glass cloth reinforcement.
Available in sheets of dimensions as per customer request
SKTIF series
Dureza personalizable (Shore 00)
Desde 1’5W/mk hasta los 6’2W/mk
Espesores desde 0’25mm hasta los 5mm.
With or without internal glass cloth reinforcement.
Available in sheets or die-cut pieces
Thermal pad phase change
SKZ series and SKTIC 800 series
Thermal pad based on silicone rubber material, specially designed for electronic applications to join the heat sink. These types of silicones changes from solid to viscous at a low temperature (50°C), which allows total contact despite surface irregularities between the heat sink and the electronic chip.
With a great power of heat dissipation and electrical insulation, they are a highly recommended option for automotive electronics.
Thickness range from 0’076mm to 0’254mm.
Option to apply adhesive or internal reinforcement of polyimide film (kapton).
Thermal conductivity from 0’95W/mk to 1’5W/mk
If you want information or advice about our products, contact us.
Silicone Thermal pads
Depending on the application, thickness, supply format and other technical-commercial parameters, we have 3 different ranges of silicone thermal pads:
SKZ series
From 1’5W/mk to 6’2W/mk
Thickness from 0’25mm to 8mm.
With or without internal glass cloth reinforcement.
Available in sheets or die-cut pieces
SKBT series
From 1W/mk to 7W/mk
Thickness from 0’200mm to 9mm.
With or without internal glass cloth reinforcement.
Available in sheets of dimensions as per customer request
SKTIF series
Dureza personalizable (Shore 00)
Desde 1’5W/mk hasta los 6’2W/mk
Espesores desde 0’25mm hasta los 5mm.
With or without internal glass cloth reinforcement.
Available in sheets or die-cut pieces
Thermal pad phase change
SKZ series and SKTIC 800 series
Thermal pad based on silicone rubber material, specially designed for electronic applications to join the heat sink. These types of silicones changes from solid to viscous at a low temperature (50°C), which allows total contact despite surface irregularities between the heat sink and the electronic chip.
With a great power of heat dissipation and electrical insulation, they are a highly recommended option for automotive electronics.
Thickness range from 0’076mm to 0’254mm.
Option to apply adhesive or internal reinforcement of polyimide film (kapton).
Thermal conductivity from 0’95W/mk to 1’5W/mk