Film PET (Polyester) (ex Mylar®)
Available in thicknesses between 12 microns and 350 microns.
Quite good mechanically, very resistant.
Thermal class B (130 ° C) holding short term temperatures up to 150-170 ° C
Very good electrical insulator, has many applications in different fields.
BO to control their contraction.
Slitted at custom width, core can be chosen beetwen carton or plàstic under specific requesti
Core Diameter: 76mm or 152mm.
PRINTABLE POLYESTER FILM
Chemically treated Polyester Film to allow be printed by laser or thermal transference.
Several thicknesses available.
SELF-EXTINGUISHING POLYESTER FILM
Chemically treated Polyester Film to give flame retardant properties.
White colour
Several thicknesses available
MILKY WHITE POLYESTER FILM
Polyester film with identical features as the standard version but with soft white colour
Several thicknesses available.
POLYESTER FILM PRINTED WITH NUMBERS/LETTERS
Polyester film with printed numbers or letters
Insulation and identification film for electrical cables manufacturers.
COLOURED POLYESTER FILM
Polyester film with identical features as the standard version but with several different colours:
Available Colours:
Red / green / yellow / blue / brown / black / Grey (other colors under request)
Standard thickness of 23 microns and 36 microns (consult other thicknesses)
PP Film (polypropylene)
Its high thermal stability allows you to work for a long time at a temperature of 100 ° C in air.
It is also resistant to boiling water can be sterilized at temperatures up to 140 ° C without fear of deformation
-
Lightweight.
-
High tensile strength.
-
Excellent dielectric properties.
-
Resistance to most acids and alkalies
-
Low moisture absorption coeficient
PI Film (Poliimide) (Ex Kapton®)
-
Resistance to very high temperatures, is rated thermal class H (180 ° C) although it can withstand peaks up to 450 ° C for a short time.
-
It is also inherently resistant to combustion and generally doesn’t need to be mixed with flame retardant product.
-
Really good electric insulator
-
Always with the distinctive honey/copper colour is unmistakable.
-
Easily adhesivable allows lamination with other films and materials giving a very useful combination of its features
good mechanically strenght
-
Very good resistance to chemicals and abrasives.
-
It can hold almost cryogenic temperatures of – 269 ° C
-
Available in thicknesses from 23 microns -125 microns (consult other thicknesses)
PEN Film (Naftali polyethylene)
This special film is treated and chemically modified to improve its, strength, chemical resistance to hydrolysis barrier gas, heat resistance and thermo-oxidative and resistance to ultraviolet rays (UV) compared to PET.
-
It holds a working temperature around 160-180 ° C.
-
Available in several thicknesses.
ARAMIDE PAPER XFiper (Ex Nomex®)
One of the main materials for the manufacture of transformers, electric motors, alternators … among another markets for its high electrical insulation characteristics and its excellent resistance under high temperature.
It has very good temperature resistance, withstanding 200 ° C continuous working.
Given its great capacity for impregnation is a material widely used resins or any product that is intended to absorb.
Good mechanical strength.
It is usually used alone or laminated with other materials to give it other properties.
Available in thicknesses from 50 microns to 760 microns
Slitted at custom width
Inner diameter 76mm or 152mm
SPECIAL FILMS
PTFE (POLYTETRAFLUOROETHYLENE) (Ex Teflon)
-
Withstands temperatures up to 260 ° C..
-
Polymer most resistant to friction.
-
Superior chemical resistance polymer.
-
Excellent electrical insulator.
-
Suitable for contact with food
-
Suitable for use inside the human body.
-
Nonsticky.
-
does not smell.
-
not burn, it melts.
-
Dripless
-
Applications components of valves, O-rings, V-rings, parts for pumps, packers, food processing, chemical equipment, cables, transformers, coils, medical prostheses, etc .